Harriet Squared

Harriet! Hi Harriet! Cloth Habit’s new pattern, the Harriet Bra, has been taking the sewing world by storm the past few months – my instagram, facebook, and bloglovin’ feeds are all full of Harriets in all shapes and sizes. It’s wonderful, and it’s high time I joined the party! (I actually made the first bra in this post a while ago, but I’m only now getting around to blogging it!)


For some reason this screams ‘a stop motion movie is about to begin’…. should I do a stop motion animation with these bras?

I’d been waiting aaaaaages for this pattern to be released, and even before I laid eyes on the samples, I’d already committed to buying the pattern. Why? First, Amy (the blogger behind Cloth Habit and designer of Harriet) was my main source of knowledge when it came to learning about bra sewing – her sewalong is free but I felt like I owed her for all the invaluable information she’d imparted. Second, I’ve realized lately that even though I can (and do) self-draft bras and whatever else I want, there’s a lot I can learn by investigating the choices other people make when drafting a pattern.


So, I got myself a copy of Harriet and…. promptly got stuck. See, Harriet’s my first. Not my first bra of course, but the first one I didn’t draft myself. My first time making a bra from someone else’s instructions – and someone else’s sizing.


Hello, Gorgeous

When I drafted mine, I just used my measurements and a ruler. There were no cup sizes or any such trivial weirdness, so it was easy to draft. Once I reached the fitting stage I was even further removed from ‘traditional sizing’ – No cup sizing here, just inches, french curves, and stretch percentages. Here I was with the Harriet, faced with figuring out which size to print out, and not a clue in the world.


You can’t tell, but I’m wearing a hot pink hat in all these pictures.

My main problem is that I was measuring at the 28E but that called for a size 36 wire – I generally use a 40. After attempting (and failing) to draft smaller cups into a band with my size 40 wire, I decided to just cut and sew my size as drafted and see where I ended up.


No, the seams aren’t supposed to line up. This does not seem to effect fit.

While the bra itself has some fit issues, it was leagues better than my original attempts to ‘frankenbra’ the pattern. The wire fits differently than I’m used to (more on that in a moment) but I definitely wouldn’t qualify it as ‘too small’ – even though it’s a whole two sizes smaller than the wire I usually wear.


For those of you following along, I’ll stick all the pertinent info in one place: Cloth Habit Harriet, 28E in View C (fully lined) except the ‘self’ pieces are woven silk, with lined stretch lace upper cups. The upper cup lace is from Elle Joan’s, purchased to match the silk, which is swag from a $10 silk scrap bag I scored from The Fabric Store. The scrap was about 24″ long and 8″ wide and had a selvedge printed with something Japanese –  it was enough for the bra with a small swatch leftover that I’m probably going to frame because I love it so much.


Okay, I know I managed to make it look good in these pictures, but I promise this bra is not as comfortable as it is pretty….

The underbust elastic (I chose to use a wider elastic than the pattern calls for) is also from Elle Joan’s, as are the rings, hook/eye clasp, powernet, and sheer cup lining. The strap and picot elastics are from a manufacturer’s surplus outlet/fabric store in South Auckland. All elastics, plus the powernet and sheer cup lining are dyed with Acid Dye from Dharma – mostly Bright Aqua with a tiny pinch of Brilliant Yellow. They’re a bit brighter than the base color of the silk, but that color is the bomb diggity so I’m not sure I care that it doesn’t match exactly.


I’m very happy I made this pattern- in fact I’ve made another one already! The instructions were easy to follow, and I really enjoyed that the way the cups are constructed hides the main seam between layers of fabric. I also hadn’t yet performed a back strap attachment in this way, so that was fun to try – and the channelling finish was a bit different than I normally would have done. That said, however much I love everything about it – it doesn’t fit.


It’s a pretty obviously too small when I wear it without the extender. Check out how it’s digging in on the right, there. 

First note: If you’ve read my previous bra blog posts, you’ll remember that I generally make plunge bras because I have a convex sternum which causes underwire issues (most people’s sternums are flat). Wires generally poke me right in the middle of my chest if they come up too high, so I avoid those styles. Why even bother with this pattern then, you ask? Well, aforementioned reasons, but also I read recently that sometimes people with similar sternums bend them out slightly, so I had decided that worst case scenario I could take a pair of pliers to them and see what happened. After wearing the finished bra for a grand total of two minutes, I realized it was time for the pliers. I bent the top 3/4″ of the wire away from my chest slightly, and the result is a much better fit in the center of my chest. Better, but not perfect.


Pretty Guts!

I needed to size up for my next Harriet. I pinned a bra extender to the clasp to test out the band with an extra 1/2″ of breathing room, which has brought this bra from the realm of ‘death squeeze’ to ‘mostly okay’ – unfortunately, there is some boob spillage going on. For the next Harriet, I decided to make a 30E: Up one cup size, and up one band size.


*when ur takin’ bra pics on the front patio and some randos walk past & give u weird looks* (I swear one day I’m gonna walk right off the edge of a cliff saying “It’s for the blog!”)

Meet 2.0! I sized up cup, band, and therefore wire – meaning now we’re only one size smaller than my usual choice. Interestingly, this wire also seems to follow my breast root well. My suspicion is that the wire springs more in this pattern than it does in my draft? I’m not sure how to prove that theory. The lace and elastics are from my little warehouse outlet in South Auckland. I’m not sure about their quality but I was pretty sure this one was going to turn out to be a tester, so I wasn’t fussed. I dyed them with Deep Magenta and a dash of Royal Purple Acid Dye from Dharma.


Right, I didn’t notice this until editing, but this version looks a little bit like the ninety year old lady I am on the inside escaped and made a bra…

The navy fabric is stretch silk charmeuse from my silk scrap bag again. I didn’t realize the fabric had quite that much stretch until I was already committed, and it made for quite a wiggly sewing experience. I stabilized it with sheer nylon so the fit is fine, but in retrospect I should have saved the silk for a pattern that could have taken advantage of the stretch.


you may notice a few wrinkles on the cups: It’s the stretch charmeuse. Despite its random static-y weirdness, this one fits mostly pretty well.

This is definitely the size that’s supposed to fit me. The cup shape is spot on (hella smooth under a tight tee, which is awesome) and the band fits well too. Unfortunately, after wearing this bra out to dinner (Guys. Do not wear a bra in a place you can’t take it off until you’ve worn it around the house for a few hours and you’re sure it fits.) I believe I’ve established that the high center wires are not my jam.


Also pretty guts!

Even though I bent them away from my chest considerably on this one as well, I still had an angry red pressure spot on my sternum after a few hours. It gave me flashbacks of the problems I used to have in fitting rooms back when buying bras was still a thing I did.


I started my bramaking journey with a lot of assumptions about styles, types, and construction methods that I could and could not wear (or would and would not try) and for the most part I’ve been thrilled at any chance to prove myself wrong. There still might be a way for me to get around my protruding breastbone and wear longer wires, but considering my wonky sternum is also the reason I can’t lay down flat on my stomach without losing the ability to inhale….I’m not holding out too much hope.


Don’t get me wrong – I loved working with the Harriet. I learned a lot about drafting, tried a new cup construction method, and really just enjoyed the process as a whole. I  love drafting and sewing my own patterns, but sometimes it’s nice to make something that someone else has already done all the thinking for. I do wish I had more of that pretty Japanese impressionistic silk left to make something that actually fit, but I’ll survive.


These two are probably destined for life in a box until I can find someone who will fit them, or until I decide to scavenge them for parts. In the meantime, after two very pretty bras that don’t fit, I’m fairly certain the universe is trying to tell me to take what I’ve learned and go back to my own self-drafted pattern. I haven’t added anything to my lingerie box in a couple of months, and it’s high time for some new faces. Watch this space, I’ve already got another two in the queue to share with you!



12 thoughts on “Harriet Squared

  1. Merry Pinbender says:

    I am now living in hope that you ( and eventually, I) will at least be able to adapt the seam technique for t-shirt smoothness. 🙂
    Sorry ms. Harriet wasn’t a more comfortable fit. At least you have a fall back. Can’t wait to see what you make next!!
    Now must go and order from Amy. Even if Harriet isn’t quite my cup of tea, you have convinced me I need to meet her!
    PS. If you don’t explain bra window shades to the neighbors why sweat the randos? It’s not like you used fruit to fill out the cups. LOL

    • Kat says:

      Hi Merry!
      We can all hope! I actually think I’m nearly there on a bra I’m currently working on but I haven’t written the post yet so it’s a secret 😉
      It’s all about the experiment! Even if Lady Harriet didn’t work out, I think I’ve firmly established that I like a silk lower cup with a lace upper cup… and I learned a lot, which is really all you can ask for!
      Also… totally going to find some suitable fruit for a future photoshoot! HAHA!
      Lovely to hear from you as always ! ❤

  2. this little thread says:

    I too have trouble with high bridge wires, but I’ve been using the Harriet successfully after altering the bridge to be 1.5cm shorter and adjusting the lace upper cup to make the side that matches up with the bridge shorter there too. I’ve never drafted my own pattern and this is the best fit I’ve found yet, in me-made or rtw. (I’ve found with both the Watson and the Harriet that the band size is too tight by one size by measurement, I wear one size smaller than the )

    • Kat says:

      That’s interesting! 1.5cm is pretty much exactly where my self-drafted bridge ends compared to the Harriet. I do really like the shape of the Harriet cups, so I’m currently trying to decide whether I’m better off working the Harriet cups into my own frame, or modifying the Harriet frame like you did. Also, I definitely agree with you that the Harriet band size is too tight by one measurement – I’ll have to keep that in mind when I finally get around to the Watson, thanks for the tip!

  3. Michelle says:

    Hello Kat, So sorry to hear Harriet didn’t work out for you. Could you lower the bridge? You’d still get the nice shape you like in it. Lowering the bridge is a standard for me on all my bras. I’m working on drafting, and am so impressed you’re drafting your own bras. Good for you!

    • Kat says:

      Hi Michelle! I’m thinking about it! I’m trying to decide whether I’m better off lowering the bridge of the Harriet, or working the Harriet cup shape into my own drafted bridge… but in the meantime I seem to have been drawn back into my own drafting again! I’m sure there will be more Harriet-inspired bras in my future, though! Good luck with your own drafting – it’s so much fun to try new shapes!

  4. offsquare says:

    Such gorgeous bras! This has been a really good read. I had to use a band expander on mine too. It was super tight! While I love the shaping of these cups, I’ve also decided that there’s nothing quite like a good plunge bra. I’m sure that decision alone saves many hours of failures though 🙂

    • Kat says:

      It’s so interesting that so many people had a similar issue with this one! I think the ‘perfect’ bra is different for everyone, but I certainly think I’m back in the plunge camp after all this 🙂 I’ll never be done experimenting, but there’s something to be said for sticking with what works!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s